
Longview Concrete Polishing & Epoxy Flooring serves Longview and surrounding East Texas communities with concrete polishing, epoxy coatings, and surface solutions that hold up to the heat, humidity, and clay soil this region demands.

Longview Concrete Polishing & Epoxy Flooring is a concrete flooring contractor based in Longview, TX, offering 16 specialized services across 12 cities in East Texas. Whether you need a garage floor coated, a commercial slab protected, or an aging concrete surface restored, we bring the right system and the right prep work to every job. We have been serving this region since 2016, and every project gets the same attention to surface preparation that determines how long a floor actually lasts.

Bare concrete staining and crumbling? Epoxy seals the surface and delivers a tough, easy-clean finish that holds up for years.
Learn More
Heavy traffic and chemical spills demand more than standard coatings - industrial epoxy systems protect your facility floor for the long haul.
Learn More
Oil drips and grime soaking into your garage slab? A coated floor wipes clean in minutes and finally makes the space worth using.
Learn More
Need a fast-turnaround floor that resists UV yellowing? Polyaspartic coatings cure in hours and stay looking fresh far longer.
Learn More
Want a showroom-quality floor with a one-of-a-kind look? Metallic epoxy creates rich, swirling depth that flat paint never can.
Learn More
Commercial kitchens and food-production areas need a floor that handles heat, steam, and harsh cleaners without breaking down.
Learn More
Dull, porous concrete can become a low-maintenance, reflective surface that brightens any space without coatings to reapply.
Learn More
Plain gray concrete can take on warm tones and character through acid or water-based staining - an affordable upgrade with lasting results.
Learn More
Terrazzo delivers a durable, design-forward surface built from aggregate and binder that holds up beautifully for decades.
Learn More
Damp, unfinished basement floors become dry, sealed, and usable living or storage space with the right coating system.
Learn More
Every long-lasting floor starts with proper grinding - removing old coatings, leveling high spots, and opening the slab to bond.
Learn More
Unsealed concrete absorbs stains and moisture every day. A penetrating or topical sealer locks the surface and extends its life.
Learn More
Cracked or pitted slabs do not always need replacement - an overlay can restore the surface at a fraction of the cost.
Learn More
Uneven or sloped floors become flat and smooth with self-leveling overlays before any finish coating is applied.
Learn More
Hot, slippery pool decks are both uncomfortable and dangerous - a slip-resistant resurfacing makes them safe and cool underfoot.
Learn More
Old paint, adhesive, or failed coatings have to come off completely before a new system will bond and last.
Learn MoreReach out by phone or through our contact form. We will ask a few questions about your floor - the size, what it is used for, and any cracks or moisture issues you have noticed. We respond within 1 business day and schedule a time to come look at the floor in person before giving you a price.
We walk your floor, check the concrete closely for cracks, stains, and moisture, and test the slab before quoting anything. You get a written estimate that spells out exactly what is included - surface prep, repairs, coating system, and warranty - so there are no surprises on the invoice.
Our crew handles all grinding, crack repair, and coating application. Before we leave, we walk you through the finished floor, explain care and cleaning, and answer any questions. You will know exactly when the floor is ready for foot traffic and when you can park on it again.
We carry full liability insurance and workers' compensation on every project - so if anything goes wrong on your property, you are covered. Ask us for proof of coverage before any work starts.
We walk your floor in person before quoting anything. You get a written estimate that breaks down prep, materials, and warranty - no phone quotes, no ballpark numbers, no surprises on the invoice.
We know East Texas clay soil, the humidity, and what happens to floors that were not prepped correctly for this climate. We have been doing this work right here since 2016.
If a coating fails due to our workmanship within the warranty period, we come back and make it right at no cost. We put that in writing before any work begins.
Ready to get started? Call (430) 267-1851 or send us a message and we will respond within 1 business day.
"They coated our two-car garage in two days and cleaned up completely before they left. The floor looks better than I expected and has held up perfectly through two rainy seasons with no peeling or soft spots anywhere."
David R., Longview - Garage Floor Coatings
"Our warehouse floor had cracks and old coating coming up in sections. They ground everything down, filled the cracks, and applied a new epoxy system that handles the forklift traffic without any issues. Job came in on time and on budget."
Pam S., Marshall - Commercial & Industrial Epoxy Floor Coatings
"The polished concrete in our showroom came out exactly how we described it - smooth, reflective, and easy to clean. They tested the slab for moisture first and explained everything before starting. Solid communication throughout."
Marcus T., Kilgore - Polished Concrete Flooring
We respond within 1 business day - no long wait, no runaround. This estimate is completely free and comes with no obligation to move forward. Once you submit the form, someone from our office will call you to schedule a free on-site visit so we can look at your floor and give you an accurate written quote.
(430) 267-1851Longview Concrete Polishing & Epoxy Flooring is based in Longview, TX and serves 12 cities across East Texas, including Marshall, Kilgore, Tyler, and Nacogdoches. We schedule same-week estimates for most locations within our service area and travel to each city with a full crew and equipment - no subcontracting.
Concrete is porous and naturally holds water from the ground below. When a coating is applied over a slab with elevated moisture, the vapor pressure pushes the coating up from underneath and causes bubbling or peeling - sometimes within weeks.
Yes. High temperatures cause epoxy to cure faster than intended, which can trap air bubbles and create a rough or uneven surface. Experienced contractors in this region schedule applications during cooler morning hours or in the fall and spring months.
On a typical project, proper surface preparation - grinding, crack filling, and moisture testing - takes as much time as the coating application itself. A contractor who rushes prep to save time is the most common reason a coating fails within the first year.
Hairline cracks and minor surface cracking are almost always repairable with the right filler and prep work before a coating goes down. Full slab replacement is generally only warranted when the structural integrity of the concrete itself has been compromised.
A topical sealer sits on the surface of the concrete and creates a physical barrier against stains and moisture. A penetrating sealer soaks into the slab and chemically bonds with it to block moisture from the inside. The right choice depends on traffic level, appearance goals, and the condition of your existing concrete. The Concrete Network (concretenetwork.com/concrete-sealer) offers a helpful overview of both types.
A coated garage floor makes the space easier to clean, more comfortable to spend time in, and more appealing to buyers if you sell. It also protects the concrete itself from deterioration, which can extend the life of the slab significantly.
For authoritative guidance on slip resistance and workplace floor safety, visit OSHA's Slip, Trip, and Fall Prevention resources.
Longview Concrete Polishing & Epoxy Flooring is a licensed and insured concrete flooring contractor company based in Longview, TX, serving 12 cities across East Texas since 2016.
We are licensed through the Texas Department of Licensing and Regulation and carry full liability insurance and workers' compensation coverage on every project.
Since 2016, we have completed concrete flooring projects across 16 service categories - from residential garage coatings to commercial and industrial epoxy systems for facilities throughout the region.
Learn more about our team and our approach to every project.
If the concrete slab is structurally sound but the surface is cracked, stained, or pitted, resurfacing with an overlay is almost always the more cost-effective choice. Full replacement makes sense only when the slab itself has failed.
The coating will crack along the same lines, usually within the first year. Cracks from clay soil movement need to be filled and stabilized before any coating goes down - not after.
Epoxy is the proven choice for most budgets and timelines. Polyaspartic is worth the added cost when you need faster cure time, better UV resistance, or the ability to coat in cooler temperatures.
The Texas A&M AgriLife Extension guide on foundations and expansive soils explains why East Texas clay causes so much cracking - and why proper concrete prep matters here more than in most parts of the country. If you have questions about your specific slab, the fastest way to get a real answer is to call us at (430) 267-1851.
Longview is the county seat of Gregg County and home to roughly 82,000 residents. It serves as the commercial and services hub for a wide stretch of East Texas, drawing people from Marshall, Kilgore, and smaller surrounding communities for work, healthcare, and shopping. The city sits in the Piney Woods region, with pine and hardwood trees covering much of the landscape in established neighborhoods.
Most homes in Longview were built between the 1950s and 1980s on concrete slab foundations - a combination that creates predictable challenges for floors over time. The clay-heavy soil throughout Gregg County expands and contracts with every rainfall and dry spell, and that movement is the primary reason slabs crack and shift. The Longview Arboretum and Nature Center sits near a neighborhood where this kind of foundation movement is a regular topic among homeowners. Whether your property is near the arboretum, out in the Pine Tree area, or near the Maude Cobb Convention Center, the slab conditions are similar across the city.
Longview averages about 47 inches of rain per year - well above the national average - and that consistent moisture keeps ground water levels elevated under slabs across the area. For concrete flooring work, that means moisture testing is not optional here. The NOAA climate data for the Longview area confirms rainfall levels that put this region well above the national average. Our crew understands those conditions and builds them into every project from the first visit through the final coat.
By appointment only, no walk-ins.
Longview Concrete Polishing & Epoxy Flooring
211 Lomond St
Longview, TX 75601
projects@longviewconcretepolishingandepoxyflooring.com
Always open, 24/7.
Call Longview Concrete Polishing & Epoxy Flooring or submit a request online - we will respond within 1 business day and schedule a free on-site estimate at your convenience.